RODE VideoMic Pro

£20.00 / day

*Our minimum hire charge is £30+VAT. Pair this with one of our Sony, Canon or Panasonic cameras to get the best value.

Compact top mic for DSLR and camcorders


Kit Includes:

  • Rode VideoMic Pro
    (Includes Rycote windshield and built in 3.5mm jack lead)
    Soft case

Clear dates

Categories: ,

Description

RODE VideoMic Pro the perfect audio solution for your shoot.

RODE VideoMic Pro

We are pleased to offer you the RODE VidoeoMic Pro. An excellent compact Rode shotgun mic that fits neatly on top of the camera via the hot-shoe plate. Suitable for all types of camcorders, DSLR type cameras, and audio recorders. What more could you ask for?

Made of 1/2″ condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector. It outputs the mono signal to both left and right channels, with an incredibly low self-noise of just 14db. Furthermore, the mic sits on a suspension mount that is designed to reduce shocks. impacts and other external factors from interfering with the microphone.

Controls for the power, filter and levels are situated at the rear of the mic giving the operator easy access. The RODE VideoMic Pro has a native 40Hz-20kHz response but also includes a high-pass filter at 80Hz, which will prevent low-end noise such as air conditioners and traffic from being recorded.

The RODE VideoMic pro is battery powered and provides over 70 hours recording from a single 9V battery.

FULL SPECS:

  • Acoustic Principle: Line Gradient
  • Active Electronics: JFET impedance converter
  • Capsule: 0.50″
  • Frequency Range: 40Hz – 20kHz (selected HPF @80)
  • Output Impedance: 200Ω
  • Maximum SPL: 134dBSPL
  • Maximum Output Level: 6.9mV (@ 1kHz, 1% THD into 1KΩ load)
  • Sensitivity: -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Equivalent Noise Level (A-weighted): 14dBA
  • Weight: 85g
  • Dimensions: 100mmH x 75mmW x 170mmD
  • Two step High Pass Filter: (flat, 80Hz)
  • Three position level control: (-10dB, 0, +20dB)
  • Camera shoe mount with 3/8” thread for easy boompole mounting