Description
Teradek Bolt Pro Wireless
The Teradek Bolt Pro Wireless 1080p60 SDI Monitoring Transmitter and Receiver. We have three kits available, two are SDI only and the third has both SDI and HDMI inputs/outputs. This device wirelessly transmits an uncompressed HD video signal, up to 1080p60 4:2:2, as far as 300 feet with zero delay. Perfect for the situation where a trailing monitor cable is not an option or just plain undesirable. The receivers feature twin 3G-SDI looping outputs to feed a monitor. We can supply the kit with one or two transmitters depending on your requirements.
The Bolt Pro transmitter has a looping SDI and HDMI output for local monitoring, a 70 minute internal battery, and can connect to more than one receiver in order to multiply the outputs.
Useful information:
Wireless 1080p60 4:2:2
The Bolt Pro Transmitter and Receiver set can wirelessly transmit 1080p60 4:2:2 up to 300 ft with zero delay.
1 TX to Multiple RX
Two or more receivers can be added into the setup. One Bolt Pro transmitter can transmit full 1080p60 HD video to multiple receivers simultaneously. Furthermore, the Bolt receivers have dual 3G-SDI outputs, which can connect to field monitors, switchers, and also Teradek Cube Encoders.
WSDI Pro Connectivity
Bolt transmits uncompressed video using WSDI Pro. This provides a wireless range of up to 300 ft and can even coexist with other wireless equipment. It does this by dynamically adjusting, in real time, to the other frequency bands that are being used. The Bolt Pro transmitters have loop-through SDI outputs that you can connect to local monitors or recorders.
Internal Battery / P-Tap / Lemo DC for External Batteries
The transmitter has an internal 70 minute battery and a P-tap input for connecting to camera batteries. An AC power supply is included for the receiver. Also, the transmitter and receiver each have a Lemo DC input for connecting external V-mount or Gold-mount batteries.
Rugged Design
The transmitter has a milled aluminum body, and the receiver has an ABS plastic body. Both the transmitter and receiver have 1/4″ mounting threads and can be attached right onto or next to the equipment you’ll be using them with.
